Another Custom Build
Well, we did it again. An international customer wanted a very specific hydraulic power unit designed for their application and Hydra-Tech Pumps is getting ready to deliver the first of many units. The customer is going to love what we have done.

This brand new, purpose built HPU features a 14 horsepower Hatz 1D90E Tier 4 Final diesel engine with electric start. A belly reservoir holds 25 gallons of hydraulic oil and a thermally activated fan assisted cooler keeps the hydraulic oil temperature in check.  The units are designed to operate hydraulic cylinders (2 per power unit) with a single handle directional valve, flow divider, load hold check valves, and cylinder synchronizing on stroke that provides accurate control to the user. The bells and whistles list for this unit includes run flat tires, air shut off safety shutdown, and a solar trickle charger for the battery to complement the charging system on the unit.

Our options list for hydraulic power units is long – there are many things we can do to customize a unit from paint to telematics and all points in between. Give Hydra-Tech Pumps a chance to supply your next hydraulic power unit and let us know how we can make it better for you!

Case Studies, Testimonials, Stories from the Field.
Two of the tools that help Hydra-Tech Pumps spread the word about how our pumps, hydraulic power units, and complete systems solve problems are case studies and testimonials. Most people know that you can drop a submersible pump into a body of water and pump from it. What kinds of non-typical pumping challenges do we help our customers solve with our products? We would love to hear your answer to this question.

At this point in time we do not have an extensive collection of case studies / testimonials but we are working on developing an arsenal with your help. We don’t often get the opportunity to get into the field with our customers and our pumps so we rely on you to help us with developing case studies and providing testimonials. At some point in the future we hope to put a new tab on our website that would offer both case studies and some testimonial quotes for our visitors to read. If we do this we would like to include your name, company information (and website if you would like). We can also write it generically about “a customer who faced this challenge and came to Hydra-Tech” or credit a testimonial to “an (excavation company / septic hauler / directional driller / marine salvage company) in the northeast”, although the whole point of a testimonial is to credit a person and a company who are known in the industry.
The video below was supplied by a good friend and customer who wishes to remain anonymous. When someone offers to take the time and make the effort to put together a video showcasing an S6VAL pump working hard, you share it – enjoy!

Pump of the Month - S4T-2
It all started with a customer request to modify and improve Hydra-Tech’s 4 inch trash pump. Known as the S4T-2, this pump was designed to fit into tighter spaces and can be used for tank truck mounting for direct loading or offloading using on-board truck hydraulics.

The S4T-2 features a hardened aluminum volute, cast and machined, combined with stainless steel wear plates for durability in a lighter package. The “dash 2” also includes a stainless steel intermediate shaft with pressed in place upper and lower bearings, driven by a hearty gear motor with high pressure lip seal.

The S4T-2 delivers output flows to 700 gpm, and is capable at overcoming heads up to 100 feet.

Hydra-Tech Pumps | Nesquehoning, PA | PH: 570-645-3779 |