Using the proper solution will make your job that much easier, be it installation, removal or maintenance. We have the "solutions" for the job.
INSTALLATION / GLASS PREP
GT2013 - Tint Slime (also available in 32oz bottle)
Tint Slime is a window tint mounting & cleaning solution. Tint Slime can be used to install automotive window tint, paint protection film, flat glass film, and vinyl. Tint Slime is free of particulates and won't separate. Tint Slime is safe for use on interiors, biodegradable, and of course, tint safe. Concentrate, mix 1 ounce per 1 gallon of water.
Mixology: 2 capfuls for 1 US gallon. 1 capful for polyspray. 1/2 capful for 32 oz bottles (GT090 & GT097)
GT735 - Film-On Concentrate
1 quart concentrate mounting solution. Use for automotive, safety/Security, decorative films, and Paint Protection Film.
GT733 - Dirt-Off Concentrate
1 quart concentrate cleaning solution. Use for interior automotive window cleaning. Great for removing oily deposits on automotive glass. Dirt-Off can calso be used as an adhesive accelerant to give additional tack for dot matrix areas.
GT714 - X-100 Mounting Solution
Cleaning and application concentrate for most dry adhesives. The mild acid formulation makes this a great cleaning agent for glass contaminated with oil, grease or dirt. NOT TO BE USED WITH COPPER OR SILVER BASED FILMS.
GT1034 - Dot Devil- 32 oz
Dot matrix prep solution. Use to aid film adhesion over dot matrix areas in auto installs
FILM REMOVAL
GT1071 - Super Stripper Adhesive Remover
Gallon of highly concentrated, ready to use adhesive remover. Excellent solution for removing film off the back glass. Less odor than traditional adhesive removal solutions.
GT1039 - Rapid Remover - 32 oz
A non-toxic, water-soluable adhesive remover that breaks down and removes adhesive fast.
CLEANING & MAINTENANCE
GT715 - Sprayway Glass Cleaner-19 oz
Ammonia free, film-friendly aerosol spray used for cleaning film surfaces after isntallation. Can also be used as an adhesive remover when left to soak.
GT160 - 19 oz Film Guard
Highly recommended for use after film installations as a cleaner and polish. Helps reduce friction and condensation between film and rubber gaskets on roll-down windows.
