Monday - Friday  10am-8pm  

Saturday  10am-6pm  

Sunday  Noon - 5pm  


9107 Mendenhall Mall Rd. #301 



The winner for our $25 Nugget Alaskan Outfitter Gift Certificate in September is Tina Clum.
 Congrats Tina - don't forget to drop by and get your gift certificate.

Winners are selected from those of you who receive and open our monthly e-newsletter. It doesn't matter when or how you signed up for our e-mail club - if you are on our email list you are a potential winner each month.

Let it Rain
We had record rainfall in July and it is looking like this fall will be pretty wet too. If you have lived in Juneau for a while you might have noticed that Juneauites don't shy away from the rain. Getting out in the rain is a fact of life and a necessity if you want to stay sane during the dark wet months. Choosing the right rain gear is key to making your wet outdoor adventures a success, but deciding which type of jacket has the right combination of breathability and water repellent properties can be confusing.

The level of water resistance and breathability that is right for you depends on the activities that you have planned for your outerwear. If you are standing in the rain fishing, then you would want something that is PVC coated and 100% waterproof (eg. Grundens, Guy Cotton and some Helly Hansen). A PVC coated raincoat is completely waterproof, and may be the ideal garment for standing in a downpour, but if you tried to hike or ski in it, you'd be wet in no time from your own perspiration. So if you are hiking up Mt. Jumbo on a typical fall day then you will want something that has a high waterproof rating (over 10,000mm), and also a high breathability rating (over 10,000g).

Waterproofing for outdoor gear is usually reported in millimeters (mm) or psi (pounds per square inch). Manufacturers use pressure to determine how much water will pass through a fabric. If you look on the comparison chart you will notice water resistance listed in millimeters (mm). This number comes from placing a square tube with inner dimensions of 1" x 1" over a piece of test fabric. Water is then added to the tube and the height (in mm) that the water reaches before it begins to leak through is measured. The higher the number, the more waterproof the fabric. The mm rating measures the height of the water while the psi rating measures the pressure the water exerts. To convert from mm into psi, divide by 704; to convert from psi to mm, multiply by 704.

Breathability is normally expressed in terms of how many grams (g) of water vapor can pass through a square meter (m) of the fabric from the inside to the outside in a 24 hour period. In the case of a 20k (20,000 g) fabric, this would be 20,000 grams. The larger the number, the more breathable the fabric.  Many Rain coats also offer pit and side zips to help increase the breathability of a jacket. When using a coated rain jacket, aim for a larger size which would allow for some air movement around the torso and up the sleeves.
Technical gear is usually waterproofed with an exterior coating (DWR) and a multi-layer laminate fabric. We carry many jackets that have either Gore-tex, eVent or a waterproof membrane which is actually laminated together with another fabric layer for increased durability and to help wick moisture through the membrane and out. Laminate construction usually offers superior breathability and durability but requires some care to maintain its full waterproof/breathable capability.

The reason these jackets appear to lose their ability to shed water over time is because the DWR (Durable Water Repellent) coating which was applied at the factory has worn off. DWR is a polymer applied to the outside of outerwear which makes water bead on the surface instead of soaking through. Once the DWR coating has worn off dust and oils may block the Gore-tex layer causing water to seep in. Washing your waterproof garments with detergent and fabric softener can also clog the pores of the fabric. The remedy is to clean the jacket in a tech-wash solution and then reapply the DWR coating. NAO carries Nikwax products for both processes for down, laminates, shoes, tents, etc, so don't give up on your old Gore-tex jacket until you have tried washing and recoating it. Always check the manufacturer's care label before washing or drying your waterproof gear, as extreme heat will damage most garments.
How to Dress for Playing in the Rain
Here's an example of layers that keep you warm even if you do happen to get wet, starting closest to your skin and working out:
  • Non-cotton underwear (eg. ExOfficio, Smartwool, Under Armour)
  • Non-cotton long underwear (eg. Terramar, Ice Breaker, Duofold)
  • Non-cotton insulating layer (e.g. Marmot, Ice Breaker, Kuhl, Outdoor Research)
  • Waterproof layer (e.g. Marmot, Helly Hansen, Outdoor Research, Sherpa, Guy Cotten, Grundens)
Just like on a winter hike, having multiple layers on allows you to quickly and easily adjust your clothing to suit your activity level. Your body won't stop sweating just because it's raining -- and when you're working so hard to avoid getting wet from the outside, the last thing you want to do is wet yourself down with sweat from the inside.
If you're hiking in warm weather, every layer can be lightweight; you might even leave the insulating layer in your pack altogether. Avoid cotton like the plague, though, even when it comes to underwear. Opt for polyester, nylon, wool or silk instead. Cotton holds any moisture -- whether from rain or sweat -- against your skin and robs your body of heat.

More Tips for Exploring in the Rain
  • Wear a cap under your hood to help with visibility, hearing and keeping water off your glasses - if you wear them.
  • Use the pit zips and vents to help stay cool while hiking.
  • Wear gaiters over your pants and boots to keep water and debris out of your boots.
  • Carry an extra pair of socks to change into if your feet do get wet - this will help prevent blisters.
  • Don't take a tent that you don't know how to set up fast, sleeping in a wet tent is no fun. If you carry a couple of tarps you can use one under the tent to help prevent the floor from abrasion or sogginess and the other to hang over head for a nice shelter while setting up your tent. After the tent is set up you can move either the tent or the tarp to provide shelter for your cooking and eating area.
  • Keeping the inside of the tent dry requires some attention. Pitch the tent/rainfly as taut as possible so it'll shed water properly. If you're in a single-wall tent, do not touch the wall of the tent -- water will seep through. If you're in a double-wall tent, don't touch the inner wall of the tent to the outer wall -- the rain will seep through.
  • Never cook inside your tent! The fumes can kill you and food prep and consumption should be kept away from your sleeping area when in bear country.
  • Leave wet gear and outer layers in the vestibule when you enter the tent; you might choose to keep damp inner layers inside the tent where your body heat can help dry them out, but make sure you adjust the tent's vents to allow some airflow -- yes, even in the rain. Without decent airflow, condensation will form inside the tent and you'll just end up wet anyway.
  • Carry your sleeping bag and a dry change of clothes in a dry bag where you know they'll stay dry no matter what.

Nugget Alaskan Outfitter | 907-789-0956 | |
9107 Mendenhall Mall Rd Ste 301
Juneau, AK 99801

Stay Connected

Facebook   Twitter   LinkedIn   Pinterest

Please Connect with desired Social Media Pages, if you have them.  Visit for help getting started with Social Media.