Foundation-7200       

  

 

 

 

Since the Foundation introduction, we have improved various operational aspects and added a number of feature enhancements. Today, we are excited to announce new Foundation firmware, V1.16, that adds a number of features that have been requested by our end users. The initial design of the Foundation focused on designing the configuration to be as simple as possible with the  inclusion of our ARES setup and calibration software. User feedback told us that manual calibration was still desirable.  Firmware V1.16 adds manual calibration features to the Foundation as well as 24 bit/192Khz support via the coaxial input. We are continuing work on additional features, including DSD over HDMI,  that will be available soon.

 

Updating the Foundation Firmware  

The easiest way to update a Foundation processor is to connect it to a network with internet access. From there, navigate through the main menu to Software Update and then press the Enter button to proceed to the Network submenu.

Software Update Software Update - Network     

Press the Enter button and the Foundation will begin checking for the latest firmware. If a more recent firmware is available, press the Enter button and the Foundation will begin the download process. When complete, the Foundation will return to standby. If the Foundation firmware is current, the Foundation will display the Software Up To Date message. 

Software Update...up-to-date   

 

Additional Features included in Firmware V1.16:

 

Manual Calibration of Individual Speakers with Noise Generator

Within the Speaker Setup sub menu, navigate to Edit Settings and select the desired Memory location to edit.

   

 

 

 

 

 

  • Press the Up or Down arrow to select the speaker to adjust.  
  • Press the Enter button to activate the noise generator.  
  • Use the Right arrow button to Navigate to the dB field and use the Up or Down arrow to adjust to the desired setting.  
  • Press the Enter button to confirm.  
  • Use the Up or Down arrow to select another speaker and repeat process.

Important Note: Once all the speakers have been adjusted, press the Left button to write the changes into memory. The Reading, Writing, Erasing DSP Flash message will appear confirming the changes have been captured.          

 

 

HDMI Video Input with Separate Audio Input 

The Foundation can now use an HDMI input for video with a different input for audio. Within the Source Setup sub menu, navigate to the Assign Input and press the Enter button.  

 

 

 

 

 

  • Press the Up or Down Button to navigate to the desired source.
  • Press the Enter button and use the Right button to highlight the current input in the Audio field.
  • Use the Up or Down button to select the desired input.
  • Press the Enter button to confirm the desired choice. For additional source changes, press the Up or Down Button to navigate to the desired source and repeat the above process.

 

Another change in this menu is the addition of a discrete Zone 2 audio input option.  Following the above steps, navigate to the Aud(io) field of a device and press the Up or Down button to change this field to Z2.  

 

 

The Default input is the SAME as Zone 1.  

  • To change, Press the Right button and then use the Up or Down button to select the desired audio input for Zone 2.
  • Press the Enter button to confirm the desired choice.
    

 

Two Channel Downmix Output from the HDMI Outputs

The Foundation processor now provides a Two Channel downmix to the HDMI outputs. Now, any source connected to the Foundation will output audio, via HDMI, to the connected TV monitor.  This allows sources to be used without having the entire surround system powered up and active. No configuration is necessary for this feature.

  

 

  

24 Bit/192 KHz Support via Coaxial Digital Inputs

The Foundation now supports 24 Bit/192 KHz signals via the digital coaxial inputs. 24 Bit/192 KHz is also supported on the HDMI inputs. No configuration is necessary for this feature.  

 

Thank you for your support. Please contact the Krell sales department at sales@krellonline.com or 203-298-4000 with any questions. 

Stay Connected

Like us on Facebook    Follow us on Twitter   
Krell Industries | krellannouncements@krellonline.com | http://www.krellonline.com
45 Connair Rd.
Orange, CT 06477-3650

Copyright � 2012. All Rights Reserved.