|
May 1-5, 2023
National Safety Stand-Down to Prevent Workplace Falls
Fatalities caused by falls from elevation continue to be a leading cause of death for construction employees, accounting for 378 of the 986 construction fatalities recorded in 2021 (BLS data). Those deaths were preventable. The National Safety Stand-Down raises fall hazard awareness across the country in an effort to stop fall fatalities and injuries.
CLICK HERE to Participate in OSHA's Stand-Down
What is a Safety Stand-Down?
Who Can Participate?
Partners
How to Conduct a Safety Stand-Down and FAQs
Certificate of Participation
Share Your Story With Us
NMUCA has Hard Hat Stickers & Booklets
-------------------------------------------------
Fall Protection
Fall Protection Toolbox Talk
Falls are a leading cause of serious injuries and fatalities that occur in the workplace. According to statistics published by the Bureau of Labor Statistics, there were 645 workplace fatalities due to falls to a lower level in 2020. The construction industry, in particular, experiences a large number of fall injuries and fatalities.
What Causes Falls in the Workplace?
The risk for falls is virtually present in every single workplace; however, the factors that can lead to a fall vary greatly. There are many specific unsafe acts by employees, as well as unsafe conditions that lead to fall incidents. Falls often result from a series of contributing factors. They are often the result of multiple unsafe conditions and unsafe actions combined. Because of this fact, it is important to look at unsafe conditions as well as unsafe actions to recognize hazardous situations when working at heights.
Unsafe Conditions that Lead to Falls
- Unguarded leading edges
- Open holes
- Improper guardrails
- Damaged equipment (ladders, stairs, safety equipment, etc.)
- Slippery conditions
- Unmarked elevation changes
Unsafe Actions that Lead to Falls
- Working at heights without fall protection or fall prevention methods in place
- Improper use of ladders
- Leaning over guardrails
Best Practices to Avoid Falls in the Workplace
The best way to avoid falls is by eliminating work tasks that require working at heights in the first place. Obviously, elimination is not always possible, so the risk of falling has to be mitigated through safeguards.
- Engineering controls such as physical barriers and guardrails are two fall prevention systems that are effective in preventing falls from heights.
- Using a proper fall arrest system such as a full-body harness, self-retracting lanyard, and approved anchor point with 100% tie-off is another way to prevent or mitigate the consequences of a fall.
-
Proper use of ladders. This includes using three points of contact when climbing, not leaning to one side while on the ladder, setting the ladder at the proper angle, securing the ladder, etc.
- Proper housekeeping in work areas is important in preventing falls at the same level as well as falls from heights.
- Warning signs and other methods of communicating fall hazards to nearby workers.
Summary
There are many factors that can cause or contribute to a fall occurring in the workplace. Unsafe conditions paired with unsafe actions of workers while working at heights are a recipe for disaster. Do not put yourself or another worker in a position where an injury due to a fall can occur.
Discussion points
– What work tasks could result in a fall injury at our worksite?
– What fall protection methods can we use to prevent falls during these high-risk work tasks?
| 
