For Aerospace Manufacturing & Metalworking Tools
Phone: 401-490-1141
E-mail: sales@cecs.us
Like us on




Mitee-Bite Original Fixture, Knife Edge, Series-9, Machinable Fixture & Uniforce Workholding Clamps Sales

Visit our Amazon on-line storefront to see additional products offering.

Original Fixture Clamps
Part # A B C D E F G* Max.
Torque
(Ft/Lbs)		 Holding
Force		 No. of
Clamps
Per Pack		 Sale
Price
10202 8-32 5/64 .030 .312 .110 .350 .150 1.5 205 lbs 10 $55.75
10207 10-32 3/32 .040 .500 .160 .340 .250 2.5 350 lbs 10 $58.75
10204 1/4-20 1/8 .040 .625 .190 .470 .308 6.2 800 lbs 10 $58.75
10205 5/16-24 3/16 .040 .812 .180 .460 .400 8.3 800 lbs 12 $73.50
10201 5/16-18 3/16 .040 .812 .180 .460 .400 8.3 800 lbs 12 $73.50
10206 3/8-16 3/16 .050 .812 .250 .710 .400 20.8 2,000 lbs 10 $67.75
10208 1/2-13 5/16 .100 1.000 .375 .900 .500 65.0 4,000 lbs 8 $73.50
10210 5/8-11 3/8 .100 1.187 .500 1.125 .590 100.0 6,000 lbs 4 $55.75

The cam action MITEE-BITE Fixture Clamp is made up of two simple components: a hardened steel socket cap screw with an offset head and a brass hexagonal washer.

  • Low-profile makes computer programming easier
  • Cam action provides fast, strong clamping
  • Small size allows more parts per load
  • Simple design keeps cost low

NOTE: Clockwise rotation is recommended. Locating pin should be on the right of workpiece

Knief Edge Clamps
Part # A B C D E F G Max.
Torque
(Ft/Lbs)		 Holding
Force		 No. of
Clamps
Per Pack		 Sale
Price
22584 3/8-16 3/16 .050 .812 .250 .710 .400 16.6 2,000 lbs 8 $108.50
22588B 1/2-13 5/16 .080 1.000 .375 .900 .500 52.0 4,000 lbs 8 $127.50
22592 5/8-11 3/8 .100 1.187 .500 1.125 .590 80.0 6,000 lbs 4 $84.50

Knife Edge Clamps can be used instead of the original brass hex clamps for clamping rough cut stock, castings and any material that requires a hardened clamping element
Series-9 Clamps
Part # Description Face Number Distance
from
centerline		 Screw Size Max.
Torque
(Ft/Lbs)		 Holding
Force		 Price
90110 1-6 Smooth 1 .4724 1/2-13 65 Ft Lbs 4,000 Lbs $31.95
90115 1-6 Serrated 2 .5118 $34.75
3 .5512
4 .5906
5 .6299
6 .6693
90120 7-12 Smooth 7 .7086 1/2-13 65 Ft Lbs 4,000 Lbs $35.25
90125 7-12 Serrated 8 .7480 $37.95
9 .7874
10 .8268
11 .8661
12 .9055
90130 13-18 Smooth 13 .9449 1/2-13 65 Ft Lbs 4,000 Lbs $39.95
90135 13-18 Serrated 14 .9842 $42.50
15 1.0236
16 1.0630
17 1.1024
18 1.1417
90140 19-24 Smooth 19 1.1811 1/2-13 65 Ft Lbs 4,000 Lbs $43.75
90145 19-24 Serrated 20 1.2205 $46.25
21 1.2598
22 1.2992
23 1.3386
24 1.3780

This adjustable low profile, cam action clamp provides clamping of different size workpieces merely by rotating the clamp to one of its other edges. The clamps are .394 (10mm) high and use a 1/2-13 (M12) cam screw. Each of the six clamping surfaces is a different distance from the centerline by .0394 (1mm) as shown in the chart. Therefore, one Series-9 Clamp can hold parts that vary up to .240 (9.4mm) simply by rotating the clamp to a different clamping surface.
  • Serrated or smooth edges
  • Heat treated and plated
  • 4,000 lbs. (17800 N.m.) holding force
Machinable Fixture Clamps
Part # A B C D E F G* H Max.
Torque
(Ft/Lbs)		 Holding
Force		 No. of
Clamps
Per Pack		 Sale
Price
10504 1/4-20 1/8 .040 .980 .250 .470 .250 .308 6.2 800 lbs 4 $48.00
10506 3/8-16 3/16 .050 1.230 .350 .710 .275 .400 20.8 2,000 lbs 4 $53.25
10508 1/2-13 5/16 .100 1.480 .450 .900 .300 .500 65.0 4,000 lbs 4 $65.75
10510 5/8-11 3/8 .100 1.730 .550 1.125 .350 .590 100.0 6,000 lbs 4 $80.95

These clamps, with the machinable steel washers, provide more flexibility for holding round or unusual shaped parts. Parts can be held directly to the fixture plate surface or elevated for through drilling. A special screw is provided with each package to hold the washer in the proper place during machining.

The flat edge is the same location as our original fixture clamps. It can be used where a stronger clamping surface is required.

  • Low-profile
  • Made of mild steel for machinability
Uniforce Clamps
Part # Model A B B1 C D* E F* Thread
Size		 Maximum
Spread		 Torque
(Ft/Lbs)		 Holding
Force
Lbs		 No. of
Clamps
Per Pack		 Key
Size		 Sale
Price
60250 250 .240 .27 .250 .320 .210 .140 .250 2-56 .260 0.5 200 6 5/64 $75.50
60375 375 .360 .38 .375 .470 .310 .185 .375 4-40 .390 1.1 310 6 3/32 $75.50
60500 500 .485 .58 .500 .625 .410 .220 .500 8-32 .530 2.5 500 8 9/64 $75.50
60750 750 .735 .77 .750 .940 .635 .375 .750 1/4-20 .785 10.8 1,500 6 3/16 $76.75
61000 1000 .980 1.02 1.000 1.250 .820 .500 1.000 5/16-18 1.050 10.4 2,000 4 1/4 $75.50
61500 1500 1.470 1.52 1.500 1.875 1.215 .750 1.500 1/2-13 1.560 28.3 3,500 2 3/8 $125.50
62000 2000 1.960 2.03 2.000 2.500 1.625 1.000 2.000 5/8-11 2.080 55.0 6,000 2 1/2 $190.25
D* - A milled slot wider than D dimension will insure clamp remains in line with workpiece. Clamp sides should not come in contact with slot walls during expansion.
F* - The distance needed between workpieces for clamp clearance. Drill and tap mounting hole on the center of F dimension.

The compact, economical MITEE-BITE Uniforce� Clamp enables you to fixture more parts on the machine table. The specially designed steel wedge spreads the clamping force uniformly on both sides of the 7075-T6 aluminum channel.
  • Increases production
  • Minimizes tool changes
  • Holds two parts with equilateral clamping action
  • Ideal for clamping flat or round workpieces
  • Reduces wasted space
  • Easily mated to hydraulic pull cylinders
  • Ideal for pallet changers

About Mitee-Bite

Mitee-Bite Products LLC was founded in 1986. The innovator of compact, low-profile edge clamps, which improve production in CNC machining centers. Mitee-Bite products are readily accepted because of the benefits they offer. Mitee-Bite is known worldwide for the quality of products and for the service they provide to customers.