Implementing a 7th axis linear actuator allows one robot to reposition between work stations to do the work of several robots.
They may also extend a robot’s working area without need for a larger arm. In addition, the transfer of robot away from the operating zone permits safe movement of workers or large equipment.
The B3 series of linear actuators has the mechanical rigidity and moment-loading capability to support the robotic arm when it is fully extended and carrying the load. The actuator must support the high bending moment and prevent the load from falling.
Actuators for this type of application are capable of carrying loads up to 8032 lbf (35.7 kN), strokes up to 179 inches (4,547mm) depending on screw selections, and speeds up to 60 inches per second (1,524 mm/sec).