|      Tech Services
|      CO2 Capture
|
Our Company       
ADA and BCSI at EUEC 2014
February 3-5, 2014
  
VISIT THE ADA AND BCSI BOOTH
  
Reinhold Conference 
 
Please visit us at booth #440 at the EUEC conference to discuss:
  • MATS Complaince Strategies with ACI and DSI
  • ADA's RESPond Flue Gas Conditioning Technology
  • Mercury Measurement and Monitoring
  • ClearChem Technology
 
  
 Technical Presentations
ADA-ES, Inc. and BCSI, LLC. will present on key industry topics at the upcoming EUEC conference in Phoenix, AZ.
  

  

"INTEGRATION OF SOLID SORBENT CO2 CAPTURE TECHNOLOGY TO PROVIDE FLEXIBLE CO2 CAPTURE OPTIONS IN A TIME OF REGULATORY UNCERTAINTY"
 
Tuesday, Feb. 4th: 1:00- 3:00PM- H5.2
 

William Morris*, Sharon Sjostrom, ADA-ES, Inc., Highlands Ranch, Colorado

 

On June, 25 2013, the U.S. Federal Government announced intentions to regulate CO2 emissions from existing power plants calling for an initial proposal from the EPA in June, 2014 and a finalized proposal in June, 2015. Plant efficiency upgrades may not be sufficient for meeting new CO2 guidelines in which case fuel switching from coal to natural gas or implementation of CO2 capture technology would be required to keep existing coal plants online. An advantage of post combustion capture, unlike fuel switching or oxy-fuel retrofit, is that it may be implemented as a trim over a broad range of CO2 capture from ~5-90% to meet a wide range of regulatory requirements. This presentation will focus on how ADA's 1 MW post combustion solid sorbent CO2 capture pilot will provide insight into adapting flexible solid sorbent post combustion CO2 capture technology to a wide range of potential CO2 regulatory challenges.
 
  

 

"FUEL QUALITY & MATS FOR COAL-FIRED PLANTS: THE RIPPLE EFFECT"

  

Tuesday, Feb. 4th: 3:30- 6:00PM- C6.3

Connie Senior*, Greg Filippelli, ADA-ES, Inc., Highlands Ranch, Colorado

 

The new Mercury and Air Toxics Standards (MATS) will result in new installations of activated carbon injection (ACI) systems for mercury control and dry sorbent injection (DSI) systems for HCl control. Most of these new systems will be operational in early 2015, with a few starting in 2016. A critical part of the procurement process for new air pollution control systems is the determination of a basis of design and the identification of a design fuel, which could represent typical or worst-case fuel properties. Over the long term, a boiler will not burn just one coal or a single coal blend. Fuel flexibility is highly desirable, but changing fuels affects the operation of ACI and DSI systems installed for MATS. In this presentation, the key elements of coal composition that affect ACI and DSI system performance will be discussed with the intent of providing guidance to allow fuel flexibility and MATS compliance over the long haul.

 

 

"ENHANCED MERCURY CONTROL FOR BOILERS THAT REQUIRE ESP FGC"

 

Wednesday, Feb. 5th: 1:00- 3:00PM- C9.7

Richard Miller*, Ken Baldrey, ADA-ES, Inc., Highlands Ranch, Colorado

  

In the past, many marginally sized ESP's have been outfitted with SO3 injection technologies to control resistivity levels when the boiler has changed fuels from a higher sulfur to a lower sulfur (higher resistivity) coal or when more stringent PM limits than originally designed have been mandated. The use of ADA's RESPondTM Flue Gas Conditioning technology has been proven to be an effective replacement for SO3 injection technologies which in the past have been demonstrated to impact acceptable mercury control, as well maintaining proper resistivity and power levels in existing ESP's. This is especially true when utilizing ACI for effective mercury control in order to achieve required MACT compliance requirements. Additionally, it is anticipated that RESPond may also be effective in restoring ESP operation when utilizing hydrated Lime based DSI products for SO3 and HCl reduction, as well as enhancing Hg control across the ESP with use of activated carbon injection (ACI). Covered will be an overview of this unique FGC product and information from pilot and full-scale operation.

 ClearChem Technology

ADA has signed a definitive agreement as a licensee for ClearChem� Technology; a patented furnace sorbent injection technology to control sulfur dioxide emissions from coal fired boilers. ClearChem expands the company's product line offering for low-cost emissions compliance, and acts as an integrated solution for the Mercury and Air Toxic Standards (MATS) and other EPA regulations.

 

For more information, please stop by our exhibit booth, or call Jim Mitchell at 303-962-1972.

To speak to an emissions control expert, please call ADA at (303)-734-1727 or email us at acisystemsales@adaes.com
 
About ADA-ES, Inc.
 

ADA-ES, Inc. and its affiliated companies offer:

  • Activated carbon injection systems for mercury control
  • Dry sorbent injection systems for HCl and SOx control
  • Flue gas conditioning chemicals and injection systems
  • coal additive systems
  • Emissions testing services
  • Refined coal technologies 
  • ClearChem Technology 

ADA's products and services maximize capital asset value and support operating efficiency improvements and many are designed to meet challenging emissions control regulations for coal-fired power plants, industrial boilers, Portland cement kilns, and related industries. ADA continues to advance cleaner energy by developing solutions for the future including CO2 capture technologies and options to stabilize waste and reduce water usage.

ADA-ES, Inc. Logo
About BCSI, LLC.
 

BCSI, LLC is a custom designer and fabricator of

  • Dry Sorbent Injection ("DSI)" for acid gas control
  • Engineered emissions control technologies
  • Bulk material handling equipment
  • Bulk storage systems
  • Water/waste water treatment equipment
  • Custom components

BCSI's technical solutions serve a wide range of industrial clients including; coal fired utilities, water treatment, waste water, cement kilns, food processing and industrial boilers. BCSI employs engineers and trade professionals at a 190,000+sq. ft. fabrication and office facility located in McKeesport, PA.

 



Quick Links:
 
  



Follow Us:
View our profile on LinkedIn  Like us on Facebook  Follow us on Twitter
Copyright � 2013
ADA-ES, Inc. All Rights Reserved.
(888) 822-8618   acisystemsales@adaes.com