|
|
|
|
Deborah Maris Lader 773.293.2070 Chicago Printmakers Collaborative |
|
|
call for Printmakers to carve relief BLOCKS for
DRUMROLL PLEASE:
a STEAMROLLER PRINTING event
at Chicago Printmakers Collaborative
August 20, 2016
11am - 6pm
|
Hello Printmakers,
You're invited to bring your carved, large-scale relief blocks to be printed by Rose Paving and team CPC on August 20th. This is a BYOB (Bring Your Own Block) event. See below for the rules and parameters. There will be a smorgasbord of relief printing activities both indoors and out, but the big blocks will be printed in CPC's back driveway (enter on Lincoln Avenue).
There will be food trucks, live music, an exhibit of relief prints, kids activities, and relief t-shirt printing. An all ages, free, community festival of ink. Visiting guest artist and veteran Steamroller babe Holly Greenberg, from Syracuse University, will be on hand to help stage the event.
Artists interested in participating should RSVP soon to deborah@chicagoprintmakers.com to reserve a place. We'll take the first 25 artists, then work our way down the waitlist as people cancel (it takes an enormous amount of time to carve a huge block, so we expect there might be some folks who drop out). Please read the instructions carefully before you commit.
The CPC team, along with volunteers and participating artists, will be inking the blocks and handling the fabric. Finished prints will be hung on clotheslines along the fence and also be weighted to dry on the CPC roof. Artists will have their blocks printed once, and printed again after other artists have had their turn. CPC will supply the ink (Gamblin Drive-By Black, at cost for $20) but artists need to bring their blocks and fabric. All other materials (like a steamroller!) will be provided. Complimentary coffee, lunch and snacks will also be provided for participating artists.
RULES:
-Maximum size of Blocks: 3 ft wide x 8 ft long
-Minimum size of Blocks: 2 ft wide x 5 ft long (no point in printing them outside if they can be printed on our indoor press, which will be otherwise occupied that day)
-Block height should be 1/2 inches or very close (see below for recommendations)
-Bring whatever FABRIC or CLOTH you want to print on (see below for recommendations). NO PAPER!
-$20 per artist to participate (this is exactly what your ink will cost). Can be paid on day of event.
-Plan on staying for a few hours to help out at the event even if your block has been printed.
Recommendations on materials:
1/2" thick MDF is your most cost-saving option for material. You can get it at most hardware stores that sell lumber (Home Depot, Menards, etc). It's around $25 for a 4 x 8 foot sheet. Check with the store to make sure it's in stock. We also recommend that you have it cut to the size you want IN STORE. MDF is known to have toxic particulates that you don't want to breathe in. When you carve it, make sure your tools are sharp (use a leather strop every 15 minutes or so to maintain) and carve outside or in a well ventilated area (dust mask encouraged).
Centra
An easy-to-carve, plastic composite material called
Centra comes in 1/4" thick sheets, but is way more expensive than MDF. Plus, you will need two sheets cut to exactly the same size in order to be at the 1/2" height requirement.
Linoleum can certainly be used, but in such large footage can break down with a 10 ton steamroller passing over it. It must be mounted to make it the required 1/2 inch height.
Other: Plywood and other materials
Make sure it's 1/2" high. Can't really make a recommendation beyond that. Basically, don't use anything that will crush under the enormous weight of a truck.
FABRIC:
Please make sure that you have at least an 8 inch margin of extra fabric around your block. If you want to print damp fabric, we'll have a sprayer hose available for that.
Don't bring anything too stiff, rough or textured (no canvas!). The best impressions are on smooth, sturdy fabric like:
-bedsheets -muslin (with a finer thread count) -parachute material -etc
Go to the fabric store and have fun with color/ pattern, etc....You don't HAVE to print on white if your block demands some background color.
Feel free to email us with any questions. RSVP asap. Looking forward to seeing your monster truck blocks.
The CPC is located at:
Chicago Printmakers Collaborative
4912 North Western Avenue
Chicago, IL 60625
tel: 773-293-2070
|
Our new studio for those of you who have not yet seen it:
the gallery:
|
|
| Chicago Printmakers Collaborative 4912 N Western Ave Chicago, IL 60625 773-293-2070 www.chicagoprintmakers.com |
|
|
|
|
|